015″ difference is the increment for Schlage Classic. If you look at the Root Depths, or the dimension from the bottom of a cut on a key to the bottom of the blade, you’ll notice that the measurements of different, successive depths increase or decrease, depending on the order in which you read it, by. Increment is the distance between different, successive depths. In the Schlage Classic keying system, the MACS is 7. If the adjacent cuts were 1 and 9, however, their difference would be 8, which would violate MACS and therefore would not possible. If your MACS is 7, for example, a 2 cut can be right next to a 9 cut because when subtracting their difference, 9-2=7, it is at or below the MACS of 7. MACS essentially tells you which cuts are allowed to be next to each other. MACS, or maximum adjacent cut specification, is the maximum allowable difference between adjacent cut depths. Regardless of availability, all manufacturer’s key bitting specifications include the following information: Schlage, on the other hand, leaves nothing to guess work they list just about every relevant detail necessary for generating or decoding keys and/or pins of their keying systems. At the very least, we’ve found that spacing and root depth information is listed by all manufacturers. Some manufacturers choose to share more information than others. Not all manufacturers list the same amount of information in each of their key bitting specifications. Schlage Classic key bitting specification. Wall Plates, Buttons, Enclosures, and Accessories.Power Supplies, Extenders, and Transformers.Primus restricted product order authorizations are managed online at restrictedproduct.allegion.Non-restricted Everest 29 S keyways do not require the ordering formalities needed for restricted products.Cylinder formats available to fit an extensive list of competitor’s locks, see Conventional Cylinders or FSIC Full Size Interchangeable Cores for details.Available formats: 6-pin Conventional and FSIC (S and T families) 7-pin Conventional and FSIC as SL cylinders, and SFIC (R family).Everest 29 high-security Primus UL 437 listed cylinders feature hardened steel drill pins and are tested and certified to be pick- and drill-resistant. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |